Skip to content
Shop Log in

Home / Insights / Business Development

Business Development · 2026-11-17

Aneutronic Fusion Under the Microscope: Five Tests p–B11 and D–He3 Still Have to Pass

By Mattias Christian Knutsson · 4 min read

Bright plasma core with luminous spiral trails of charged particles

“Aneutronic” fusion, using fuels such as proton–boron-11 (p–B11) or deuterium–helium-3 (D–He3), is often presented as the cleaner, simpler endgame for fusion power. The appeal is real: most of the energy comes out as charged particles rather than neutrons. But appeal is not the same as competitiveness. This reality check puts the concept through five tests, using published physics and companies’ own reported results.

Test 1: How neutron-free is “aneutronic”?

The comparison starts with deuterium–tritium (D–T), which releases a 14.1 MeV neutron and a 3.5 MeV alpha particle per reaction, so about 80% of the energy is carried by neutrons (UWFDM-1150).

  • D–He3 itself produces a 14.7 MeV proton and a 3.7 MeV alpha. But deuterium also fuses with itself in the same plasma, and those side reactions mean roughly 1–5% of the energy still emerges as neutrons, and some tritium is produced (UWFDM-1150).
  • p–B11 produces three alpha particles, but side reactions such as proton capture on boron-11 also generate some neutrons (UWFDM-1150).

Verdict: a large reduction in neutrons, not zero. Shielding and activation are smaller problems, not absent ones.

Test 2: Can the plasma conditions be reached?

The Wisconsin analysis notes that advanced fuels need higher plasma temperatures and better confinement than D–T, because their reaction rates peak at higher temperatures and are lower overall (UWFDM-1150). This is the steepest hurdle, and it is steepest for p–B11.

Verdict: the decisive physics test, and the one with the least experimental evidence so far.

Test 3: Is there fuel?

  • Boron-11 is not a constraint: it makes up roughly 80% of natural boron (CIAAW).
  • Helium-3 is. It is only about 0.000137% of natural helium (CIAAW). The same Wisconsin paper estimates that 1 kg of helium-3, burned with deuterium, yields about 10 MW-years of electricity (UWFDM-1150). On our arithmetic, a single 500 MW plant would therefore need on the order of 50 kg a year, a quantity no current supply chain provides.

Verdict: p–B11 passes; D–He3 depends on a fuel source that does not yet exist at scale. Our earlier analysis of fusion fuel economics looks at that supply question in more detail.

Test 4: What has been shown in 2026?

  • Helion reported that its Polaris prototype reached 150 million °C in early 2026 and produced measurable D–T fusion; it plans to use D–He3 commercially and says it will keep raising temperatures to operate with that fuel (Helion).
  • TAE Technologies, pursuing p–B11, reported forming a field-reversed configuration plasma using only neutral-beam injection, and said it is upgrading its Norm device to reach 100 million °C (TAE).

Verdict: real engineering progress, but the temperatures reported so far are below what the advanced fuels need for power production, and neither company has reported energy gain with an aneutronic fuel.

Test 5: Does the business case close?

The prize for passing tests 1–4 would be plants with lighter shielding, less activated material and, because the products are charged, the possibility of converting their energy to electricity directly rather than through steam. Against that stand higher physics risk, and for D–He3 a fuel-supply risk outside any single company’s control.

The scorecard

Test p–B11 D–He3
Neutron reduction Large, not zero Large, ~1–5% of energy as neutrons
Plasma conditions Hardest Hard, easier than p–B11
Fuel supply Abundant Very scarce
Demonstrated in 2026 Plasma formation and heating progress 150 million °C; D–T fusion measured
Gain with this fuel Not reported Not reported

Table: BusinessCraft assessment based on the sources linked in this article.

Answer to the headline question: aneutronic fusion can compete only if it clears the plasma-conditions test that D–T developers do not have to face. In 2026 it remains a high-risk, high-reward branch of the field rather than a near-term competitor.

Key figures

Key figures
Figure Value Source
D–T reaction products 14.1 MeV neutron + 3.5 MeV alpha UWFDM-1150
D–He3 energy released as neutrons (side reactions) ≈ 1–5% UWFDM-1150
Electricity from 1 kg He-3 (with D) ≈ 10 MW-years UWFDM-1150
Helium-3 share of natural helium ≈ 0.000137% CIAAW
Boron-11 share of natural boron ≈ 80% CIAAW

Figures as published by the linked sources; table compiled by BusinessCraft.

Related reading

This article is general information, not investment advice.

Sources

  1. Kulcinski & Santarius: Advanced fuels under debate, UWFDM-1150, University of Wisconsin Fusion Technology Institute (Oct 2000)
  2. CIAAW: Atomic weight of boron (isotopic abundance)
  3. CIAAW: Atomic weight of helium (isotopic abundance)
  4. Helion: Helion achieves new fusion energy milestones (Feb 2026)
  5. TAE Technologies: TAE shortens device roadmap, prepares for commercial era (Nov 2025)
Mattias Christian Knutsson
Founder & Editor, BusinessCraft
Mattias Christian Knutsson is the founder of BusinessCraft Nordic AB and primary author on businesscraft.se.
About Mattias and BusinessCraft → · Biography →

The monthly letter